Item #: UBP2001
Wizard Ball Plug
(2 gallon kit - 1:1 - with two, one ounce pumps, stir sticks & free Wizcolor)

Item #: UBP2000
Wizard Ball Plug
(2 quart kit - 1:1 - with two, one ounce pumps, stir sticks & free WizColor)

Wizard Ball Plug by Ultimate Bowling Products is such an amazing product that when wanting to talk about, it is difficult to know where to begin. It is the only reliable quick set plug available. It is a "true" urethane material that is easy to work and has an incredible feel.

The process goes like this: plug the fingers, wait 10 minutes, roll the ball up and plug the thumb, wait 10 minutes, roll the ball over and plug the weight hole, wait 1 hour, knock the plugs down, lay the ball out and start drilling.

There is no need to have your bench tied up for 3 days, when in less than 2 hours you can be preparing a "service ticket." Spend more time earning money, less time waiting for the plug to cure!

Besides, epoxy based materials are always shrinking and cracking under the stresses associated with life in a bowling ball. How many times have your customers asked you to do it again when the plug starts cracking? Wizard doesn't do that!

Now, if you're the creative type and you like the idea of increasing profits: use Wizard Ball Plug in combination with our Wizard Mold Kit or Donkee Mold Kit. Produce your own solids and thumb inserts. Why spend $2.50 - $3.50, plus freight, for urethane solids when you can make your own for not much more than $1.00 each? With our Donkee Mold Kit, you can produce "round" and "oval" inserts to size for way less than $1.00 each. No large investment and no lost wall space inventorying each of the colors, in each of the sizes: simply make them as you need them!

You know how there is always plug material left in your mixing cup after plugging a hole? You generally throw it in the trash: right? When you use Wizard Ball Plug you simply poor that "left-over" material into a mold and turn your "trash" into "cash."

... But wait - there's more! … And it really, really, works! ...

If you are doing custom thumbs and not using Wizard to produce the thumb insert, you are missing another great opportunity. By filling the space between the rubber mold and the cylinder with Wizard Ball Plug your custom thumb is ready in less than an hour and gives your bowler the truly great feel that only Wizard offers.

If you are not into saving a lot of money but do like saving some money, you can still get the workability and feel of Wizard's material because we make and sell solids. For a lot less than you are paying the other folks, you can still win with Wizard! Solids are produced in: white, black, blue, yellow, and green, in each diameter of 1 1/8, 1 ¼ & 1 3/8.

Ultimate success in service work begins and ends with Ultimate Wizard Ball Plug.

To view the instructions for Wizard ball plug: follow this link.

Return to top of page

Item #: UBP2002WizKit
WizColor Kit
Item #: UBP2003D WizColor
Individual Color Bottle

Our WizColors are not dyes but rather actual color pigment. Influencing the coloring of urethane is different from epoxy. When no color pigment was added to earlier versions of Wizard, it cured to a "yellowish" shade of white making it difficult to color match lighter balls.. Since we completely re-engineered Wizard the summer of 2010, it now cures to a bright white. Now, with a little practice color matching (even polyester balls) can be achieved.

WizColors are in full, one ounce bottles. The kit contains: white, black, brown, magenta, teal, red, blue, green, purple, yellow, orange and silver pearl. The silver pearl is currently in a powder form. Any color may be purchased individually.

Apply color(s) and throughly mix into part "b" then add part "a," stir a few seconds and pour. Normally 12 drops of a single color or 12 total drops of combinations of colors will be all that is needed to achieve your desired color.

Return to top of page

Item #: UBP5001D
Donkee Insert Molding Kit

When Donkey was willing to sell their slug mold kit, it was only natural that Ultimate Bowling Products would be willing to buy it. Ultimate's Donkee Insert Molding Kit, in combination with Ultimate Wizard Ball Plug forms a mighty effective alliance in lowering pro shop costs and increasing pro shop profits. Anytime you lower cost, you increase the bottom line of your income statement!

With this kit you can produce your own 1 3/8, 1 ¼, 1 1/8 urethane solids, as well as, oval urethane slug inserts in the following sizes: 21/32, 11/16, ¾, 25/32, 13/16, 27/32, 7/8, 29/32, 15/16, 31/32, 63/64, 1, 1 1/64, 1 1/32 and round urethane slug inserts of: ¾, 25/32, 13/16, 27/32, 7/8, 29/32, 15/16, 31/32, 63/64, 1, 1 1/32, 1 1/16, 1 1/32, and 1 1/8.

There are 12, color-coded, molding cylinders: 4) 1 1/8, 4) 1 ¼, 4) 1 3/8, 2) cylinder end-caps for making solids, and 2) mold release rings. All 45 pieces are organized and contained in a single storage box.

You are fully aware of the "ever" rising costs of manufactured solids then add some freight expense. "Solid logic" would dictate taking very little effort and producing you own solids for around $1.00 each.

To view the instructions for our Donkee Molding Kit: follow this link.

When you buy solids, you pay for the whole thing but you end up using such a small portion of it. Most of what you bought goes in the shop-vac as you drill the hole. Most of what you are buying ends up as trash. If you are looking for "solid logic," you won't find it there!

With the Ultimate Donkey Mold Kit, when you need a hole in an insert, make the insert with the hole all ready there. No waste! "Solid logic."

Ultimate Donkey Mold Kit (plus) Ultimate Wizard Ball Plug
any size, any shape, any color insert, in less than 45 minutes.

The Donkee molding cylinders can also be used when casting Custom Thumbs.

Extra or replacements for any item in the Donkee kit are available as single items.

Return to top of page

Item #: UBP5002D1 (3 cells @ 1 1/8")
Item #: UBP5002D2 (3 cells @ 1 1/4")
Item #: UBP5002D3 (3 cells @ 1 3/8")
Item #: UBP5002D4 (3 cells: 1 @ 1 1/8", 1 @ 1 1/4", 1 @ 1 3/8")
Wizard Slug Mold (3 Cell Slug/Solid Mold)

Our Wizard Slug Mold is a 3 cell mold for producing your own urethane solids with Wizard Ball Plug. Each mold can produce 1 to 3 slugs at a time. It is a two piece mold, so the bottom piece is easily removed which allows for easy extraction of the cured urethane slugs.

The molds are available in four different varieties. Either all 3 cells in 1 1/8" or all 3 cells in 1 1/4" or all 3 cells in 1 3/8" or the 3 cells are each a different size: 1 in 1 1/8", 1 in 1 1/4" and 1 in 1 3/8".

Think about the ability to eliminate all the slug inventory you have in drawers and displayed on the walls of your shop. If you need a 1 1/8" slug in yellow, just make it yourself and save a couple of dollars. Take that "couple of dollars" times, the number of slugs you go through a year will amount to a pretty large chunk on money.

Here's something else to ponder: each time you plug a ball you have plug left over in your mixing cup which generally cures in the cup and goes in the trash. With a little practice you'll learn by looking at that left-over material what size slug you can make. Instead of going into the trash, you now have something that you can sell for 10, 12, or 15 bucks.

Making your own slugs doesn't require a lot of effort but it sure does a lot to increase profits!

Return to top of page